- 261
- Turkey
very nice update. thank you for that. I wish the fenders of such a beautiful car were not like a car that had an accident. also the brake discs are always red
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 141,625 comments
- 39,245,454 views
- 6,823
- The Bunker
Thanks for this. It's a really great-looking track and finally gives hope that photogrammetry might actually work if combined well with traditional 3D assets, without everything looking like melted ice cream. It certainly gives more of a naturally organic look to the environment. Even the best manually-textured tracks can look rather fake by comparison.
I noticed that the trees have planar shading so the normals probably aren't pointing vertically.
Add this to correct that, but you might need to adjust the ambient and diffuse values for personal preference (I've not tried it in conjunction with your own config adjustments yet).
I had to point the normals vertically down for some reason, pointing up didn't work. It sometimes doesn't.
Code:
;fix tree normals (should work if ksTree shader is used)
[ALTER_NORMALS_...]
MATERIALS = shader:ksTree
OFFSET = 0, -1, 0; 0, 1e9, 0
DESCRIPTION= lighten/darken trees after normal fix above
MATERIALS = shader:ksTree
PROP_... = ksAmbient, 0.4 ;adjust for personal preference
PROP_... = ksDiffuse, 0.4 ;adjust for personal preference
Last edited:
- 170
- Finland
No problem with the brake discs here, but I agree about the fenders.
- 294
- Australia
Arouuuund 🎶You're the best
- 158
- Spain
I think it's better if you can send me your mod, because it goes from bad to worst on my side.
- 701
- Australia
Thoroughly enjoyed the videos - what a tough competitor that #62 - diving late in front of you in that horseshoe-turn, you having to go on the inside, clipping the tall grass coming out of the turn - the effects were awesome... Tell me, you're obviously driving in VR mode - what hardware do you have? Cause the immersion is phenomenal, thanks. Going to start saving immediately for it so it doesn't break the household budget...
Opel Calibra DTM - Classic Gulf Livery WIP
Personally, this is a classic livery for me, which I'm happy to include in the collection...
- 5,617
- Belgium
Well, not here.
Do I have to perform some kind of wizzardry maybe ?
I’m on the latest CSP, all my other cars have working wipers (as far as they are present)
- 193
- France
It's strictly NeckFX here, i'm a long term mono-screen user (i get motion sickness in VR and the kids scare the **** outta me each time they jump in in the middle of a race).Thoroughly enjoyed the videos - what a tough competitor that #62 - diving late in front of you in that horseshoe-turn, you having to go on the inside, clipping the tall grass coming out of the turn - the effects were awesome... Tell me, you're obviously driving in VR mode - what hardware do you have? Cause the immersion is phenomenal, thanks. Going to start saving immediately for it so it doesn't break the household budget...
I use Reshade for some extra immersivity, and either test ppfilters from others or use mines. Apart from that, i'm running AC in 2K with a 7800Xt which is "quite" affordable.
- 215
- Саратов
Good afternoon. Question about editing tracks. The essence of the question is, on the track, in a narrow closed city section along the edges, near the walls, there are lamp posts, and bots regularly drive slightly beyond the road, crash into these posts, flying apart in different directions and causing massive blockages in this narrow corridor. Is it possible to use ext_config.ini without hiding the visual part of the post, but disable its physical part? In other words, is it possible to disable collisions with posts, while leaving them visible, using ext_config.ini?
- 470
- Pizza
First of all, thanks to everyone for the comments, now let's see what we can do. 😎
As for the windshield wipers, I'm almost sure it's a CSP problem because, with the latest update, it became impossible for me to create them and sometimes they don't work (on various cars and not consistently). In fact, I won't deny that also on some circuits it rains inside all the cars and on others it doesn't. So I'll try to fix everything with the next CSP update, hoping it works. I also have to temporarily give up on the z3m because I tried in every way to create them but nothing, they don't work.
As for the fenders, yes, I can fix them. I didn't do it before because... I forgot to do that LOL
As for the brake discs that always stay lit, it's a bug not related to the car, it happens to me sometimes and with various cars.
The fix to prevent sun getting into the cockpit through bodywork and the fix for the motec will be added in the next update (thanks @Masscot)
As for the windshield wipers, I'm almost sure it's a CSP problem because, with the latest update, it became impossible for me to create them and sometimes they don't work (on various cars and not consistently). In fact, I won't deny that also on some circuits it rains inside all the cars and on others it doesn't. So I'll try to fix everything with the next CSP update, hoping it works. I also have to temporarily give up on the z3m because I tried in every way to create them but nothing, they don't work.
As for the fenders, yes, I can fix them. I didn't do it before because... I forgot to do that LOL
As for the brake discs that always stay lit, it's a bug not related to the car, it happens to me sometimes and with various cars.
The fix to prevent sun getting into the cockpit through bodywork and the fix for the motec will be added in the next update (thanks @Masscot)
Last edited:
- 2,243
- Helsinki
it might be possible by redefining those meshes in surfaces.ini using extended track physics
prolly better to make new sidelines and AI
- 470
- Pizza
tried different skins. different result for all 3
red circle shows the wiper. Marc VDS Racing Team 41 2011
View attachment 1390750
I'm very confused 😂 😱
- 723
- United Kingdom
I don't no if your having an issue with the one i posted up or not, i just checked mine and have no weird shadows although i do have a warning about banner.png/lod1 or something. Personally i dont worry about that as the car looks fine and i'm not a replay man or a full grid of car's type of dude i just do hotlaps so lod's for me in any capacity dont realy bother me although that banner warnng may just be code i removed i have no idea.
hahahahaahah thats the new lightweight Venturi fiar play your ahead of the game
i posted up a link to the one i have a page or 2 ago, should still be there
@GT3Masters97 i have noticed aswell that half may car's brake disc's dont light up at all some light up forever and some work.........its been a bug for a fair while now
Last edited:
- 412
- Finland
- 829
- Italy
Whooopsie, forgot to mention, I wasn't using your version. F302 car and Zinski's skins.
- 470
- Pizza
- 6,823
- The Bunker
Working on another update to Brno, with some texture updates for a few adboards, and guff like animated birds added. But the main difference will be a complete overhaul of the tree textures.
Guess what, SimBin? Brno isn't a Christmas card scene with nothing but pine trees and firs, so this will be reflected in the variety of trees in the update.
Trees will all now be of the same high-resolution quality (rather than the 8-bit mishmash we had before) and new bespoke transparent treewalls are being created from the same textures.
Everything will be tone mapped and balanced to the environment.
Still WIP at the moment but it's already transformed the look of the track. Really pleased with the results so far.
Guess what, SimBin? Brno isn't a Christmas card scene with nothing but pine trees and firs, so this will be reflected in the variety of trees in the update.
Trees will all now be of the same high-resolution quality (rather than the 8-bit mishmash we had before) and new bespoke transparent treewalls are being created from the same textures.
Everything will be tone mapped and balanced to the environment.
Still WIP at the moment but it's already transformed the look of the track. Really pleased with the results so far.
Attachments
- 466
- @home
Check out the tracklist of mr @Breathe and you will find nearly all the tracks that are made for AC including the additional mods.
Do a search on him here and click on his link.
- 12
- Romania
There are "ext_config.ini" files in some of the skin folders, something about "[MESH_ADJUSTMENT_3]". These cause the wiper to not work properly.I really have no idea what is going on, I am seriously confused. The wipers are handled by csp in the general ext_config...
Delete the "ext_config.ini" files in the skin folders. Wipers will work fine after that.
- 215
- Саратов
Similar threads
