The General Anime Thread...

  • Thread starter Kent
  • 66,821 comments
  • 2,904,559 views
He left before the bear arrives to terrorize everyone... I also happened to be listening to some apocalyptic-sounding soundtrack so I had a good laugh just now.

You guys should invest in asian-packaged drinks instead of energy drinks... they at least taste good.
 
And Walter, you're probably going Oahu. Which I'm not on, at least not anymore.

Most likely, yeah.

You guys should invest in asian-packaged drinks instead of energy drinks... they at least taste good.

Red Bull and Monster Rehab would like to have a word with you.

Well okay, Red Bull's a bit of an acquired taste perhaps. But if you don't like tea and lemonade, you should go jump off a bridge and get eaten by evil dolphins.
 
Awww hey, I ain't no seaman.

You totally should be though. Consider it:
canadasnavy3481056.jpg


And that way, we could totally play battleship! :D
...I'd win, of course. :lol:
 
I can only imagine the homo-erotic nature sense of community on a ship that size. :lol:

I know, right? So what are you waiting for?? Join! :P

I like the size of my ship... it's just big enough for me to feel like my butthole is safe but just small enough for gay jokes to be funny. :lol:

We're getting females in March though, so unfortunately we're gonna have to be all "politically correct" soon... :indiff:
 
But if you don't like tea and lemonade, you should go jump off a bridge and get eaten by evil dolphins.

Who the hell do you think I am?! The stuff I just suggested over energy drinks ARE tea and Lemonade! Stupid man. :P
 
I like this statement in context and out of context. :lol:

:lol:

Also, before you complain about it AOS, yes this is now The General Anime/Canadian Navy Recruitment Thread. You and Loli should join together. That way I can sink both your battleships. :3
 
it's just big enough for me to feel like my butthole is safe but just small enough for gay jokes to be funny. :lol:

I think I just found a second contender for quote of the year :lol:
 

keep in mind this video was made in 2009...


Nice!!! Brings back some memories. If the point was most brutal slayers in anime, I'd have to mostly agree. Except the Bleach guy. Yeah, his power is over 9000 but he's basically a good guy and I don't see him getting into a rage and killing everybody so much. But Guts? Hell yeah. Thought I ranked Berserk kind of low, it was mostly due to story weirdness. In retrospect, it did leave an impression of awesomeness. And Ninja Scroll, another big hells yes!
 
I don't even know what this thread is about anymore.

Something else I don't know is how to use this goddamn paint; it's been so long since I've "actual" paint. I can't even get it to stick to the damn brush (as thin/fine as it is), but it'll stick lovely to the mixing match I'm using.

If you're wondering "WTF? A Match?", I don't have any toothpicks left so I'm using a wooden match. And Andy is right, Mr. Color smells like nail polish.
 
I don't even know what this thread is about anymore.

Something else I don't know is how to use this goddamn paint; it's been so long since I've "actual" paint. I can't even get it to stick to the damn brush (as thin/fine as it is), but it'll stick lovely to the mixing match I'm using.

If you're wondering "WTF? A Match?", I don't have any toothpicks left so I'm using a wooden match. And Andy is right, Mr. Color smells like nail polish.

Use less thinner 👍. Most acrylic paint smells like nail polish.

Have a idea 💡

Make a Zaku I sniper out of a PG Zaku II. This unit FAR surpasses the GM sniper (ground type).

MS-05L_Zaku_I_Sniper_Type_-_SpecTechDetailDesign.jpg


*adds to idea book 👍
 
Use less thinner 👍. Most acrylic paint smells like nail polish.

Have a idea 💡

Make a Zaku I sniper out of a PG Zaku II. This unit FAR surpasses the GM sniper (ground type).

*adds to idea book 👍
I don't have any thinner. I have 70% alcohol though. Can I use that?

And how would be nice, too.

---

Don't judge me. It's been years, dammit. :lol:


Ku ku ku.... it must be your first encounter of Mr.Color.

Si. I've only ever used Tamiya during the short (very short) time I was painting by hand. Which sucked...because I sucked at the time. :grumpy:

edit: tree'd like a baseball hat.

Baseball bat, maybe? :P
 
I don't have any thinner. I have 70% alcohol though. Can I use that?

And how would be nice, too.

---

Don't judge me. It's been years, dammit. :lol:

Only works with 91%. HOW COULD YOU not buy thinner:ouch:.... You should be sanding and priming now:tup:.
 
Like a baby on a boob?


I haven't bought thinner, come at me.

Quite the illustrative one, aren't we? And yes. :lol:

Only works with 91%. HOW COULD YOU not buy thinner:ouch:.... You should be sanding and priming now:tup:.

I gotta honest...I'm devastated.

Nah, I ran out of money and won't be able to buy thinner or anymore primer (as it stands I only have top and clear coat cans), but I can most likely bribe my aunt or something to pick up some 91% tomorr, er, today.
 
Given how detailed Lain artwork is(environment-wise), it would be a ballin' profile 👍

My DVD case looked effin' cool.
What release was it?
http://www.animenewsnetwork.com/encyclopedia/anime.php?id=166

No matter the release though, you have an out of print anime that's going for hundreds on Amazon. FUNimation did license-rescue it, but they haven't received the material to begin working on it due to the Geneon Universal merger in Japan.

Last month they did say the roadblock on Geneon titles was starting to go away, but who knows when all this Geneon stuff will be released, or get back into print (I need my Shana back in print!!:grumpy:).
-----------------
Forgot to mention Brave 10, I watched episode 1 yesterday. Things were fairly confusing, and they didn't explain much, but it was actually fairly satisfying. Currently a 7/10 right off the bat.

Ano Natsu de Matteru, that is in a similar boat as Brave 10, but it was better, but this also is a 7/10. Also, LMAO at the ending of episode 1.:lol:
 
Looking at the MG Sinanju on Dalong.net (review). I see so many places in need of improvement. If you have a needle file, go over some panel line areas. Will make it more easy to prime and add a more realistic view of some of the parts. Spikes on the shoulder need to be sharpened. + some more, but I will not raunt since the process requires styrene and metal.
 

Latest Posts

Back