Assetto Corsa PC Mods General DiscussionPC

[alexfre]

Hey everyone, I recently updated CSP and went to race at Mike08's Lienz track and got a crash: "Failed to allocate GPU memory" - after doing some research it looks like an update in CSP changed the way camera_facing.ini loads and causes this crash. So far this is the only circuit to have this problem.

Any ideas on how I can fix this issue so I can run this track?

same problem in some circuits, csp 0.2.5P1 .
I have not found any solution for now.

 

[Fanapryde]

in the skin ext_config, if I replace number of "[MESH_ADJUSTMENT_X] (X is number 0/1/2/3) by [MESH_ADJUSTMENT_...]" wiper is working.

other issue, I have very low power of braking, I tried with and without extended physics without succes.

EDIT : I think it's because you haven't anything about ABS on the electronics.ini file
IF you add this below it's Ok (maybe settings aren't accurate) :

[ABS]
SLIP_RATIO_LIMIT=0.17
CURVE=
PRESENT=0
ACTIVE=0
RATE_HZ=58

Afaik this (and all other GT1 cars) did not have ABS, right ?

 

[FrustratedUse]

Afaik this (and all other GT1 cars) did not have ABS, right ?

GT1 cars did not feature ABS or TCS

 

[Alis_70]

Afaik this (and all other GT1 cars) did not have ABS, right ?

I don't really know, but I think with this setting PRESENT=0 / ACTIVE=0 car haven't ABS ingame ?!

 

[JK1977]

Released : Dodge Chager STR8 GR.3 (Fictional Race Car)
Author:F302
3D Model :The Crew2
Texture Update : F302 (rework)
Skins: F302
3d work: F302
Lod´s: ACTK
Tweaks:ACTK
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
tested on CSP 0.2.5-preview1
PP filer PURELIFE_EVO
have fun!
To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager

72.13 MB file on MEGA

mega.nz

 

[Young78]

Ferrari 500 Mondial Pinin Farina Coupe(v1.0) by F40 LM Lover

It is tested in CSP 2.5 Preview1
You need CSP latest Version

1. 3d Model
1) Based on Gran Turismo 7 by Poly Pony Digital
2) Some Parts are from Forza Horizon 4
3) Converted by F40 LM Lover
2. Features
1) Exterior Animations
-. Left Door : Extra A
-. Right Door : Extra B
-. MOTOR Hood Open : Extra C
-. Quarter Window Open : Extra D
-. Fog Lights : Extra F
2) Interior Animations
-. GAS, Brake, Clutch Pedal with Feet : Don't need Key assign
-. Trun Signal Switch with Arm & Hand : need Key Assign
-. Lighting Signal Switch with Arm & Hand : need Key Assign
-. Windows Open with Arm & Hand
-. Fog Light with Arm & hand
-. H-Pattern Shifter with Arm & Hand
-. Horn With Arm & Hand
3. Physics : F40 LM Lover
4. Sounds : Kunos' 250 GTO
5. Download Link is in the description of video.

 

[sab001]

The real load comes with low sunangles.
You can compare the load with CSP render stats app and you can switch shadow resolutions ingame with the video mode app. There you see the bigger load. Its a direct and linear load progression. There is no magic behind it. If you have shadows at 4096x4096 it will use 4x the load like 2048x2048.

Also you always need to check for the pop-in/pop-out shadows. Like at tracks with hills, set a low sunangle and drive around the track. Only with a high 3rd value you will prevent those shadows fluctuations.

With your suggested settings I no longer see the cascade split anywhere even with late day long shadows. I'm using 4096 shadows and it looks great. Thanks!

edit: I found a few places where the split is still evident but it's *closer to me in cockpit view but seems less imposing (perhaps depending on how far I'm looking ahead?)

 

[GT3Masters97]

in the skin ext_config, if I replace number of "[MESH_ADJUSTMENT_X] (X is number 0/1/2/3) by [MESH_ADJUSTMENT_...]" wiper is working.

other issue, I have very low power of braking, I tried with and without extended physics without succes.

EDIT : I think it's because you haven't anything about ABS on the electronics.ini file
IF you add this below it's Ok (maybe settings aren't accurate) :

[ABS]
SLIP_RATIO_LIMIT=0.17
CURVE=
PRESENT=0
ACTIVE=0
RATE_HZ=58

Afaik this (and all other GT1 cars) did not have ABS, right ?

GT1 cars did not feature ABS or TCS

GT1 class does not have abs or tcs. I think ChemFlummi did not include them for this reason

I'll take into account what was said about the mesh adjustment, at least this way I won't have to redo the windshield wipers from scratch again LOL


Now a little question: since I switched to pure LCS and the new CSP I have all these graphic artifacts (lights and reflections with every PP-Filter I have). Does anyone know what causes them?

 

[jac0]

You can't have superp settings for all situations with these 3 values!!!

Those are the distances of the shadow cascades.

So in AC the shadows, or better the shadows resolution, or better the resulution of the sun light processing on track objects is splitted into 3 or 4 parts. Also the resolution within such a cascade is dynamic, dependend on the range from one to another cascade.

So the first one (the nearest one) has the biggest resolution. It is the resulotion you set for the shadows in the AC video settings.

So the higher a value is there, the more distant the next shadow cascade is, but you will also lower resolution if you widen the cascade distance.

View attachment 1390918

So the quality of shadows in AC is always balanced to reduce the load on the GPU.

You can set it very high quality, but only with the cost of being very rough in the distance or vise versa.

The only way to have overall superb quality is to set the 3rd value very big and set shadows resolution to the highest possible.


And you have many many optimization methods in AC to bypass the shadows rendering, because it is always heavy. So you might see sudden unshadowed things out of a certain FOV.


So sunlight light processing is the most GPU heavy render thing and thats why there are so many methods to minimize the load.
Because noone will understand it, that for good shadows your fps will massively go down.

Here are settings for very good shadows:
View attachment 1390924
View attachment 1390925

But with a very high GPU load!

View attachment 1390926

thank you Peter for that great explanation!
I will play around with it and land on a comfortable middle ground...

Cheers and have a good weekend!

 

[demankz]

The first livery skin is done and the AO map is fixed as much as I could
View attachment 1390954View attachment 1390956View attachment 1390957View attachment 1390958

Thank you so much for this work, I can't wait for you to release it, I don't know why but I like it the most out of all the Nissan GN500

 

[Cote Dazur]

Ferrari 500 Mondial

Pininfarina​

Coupe(v1.0) by F40 LM Lover

It is tested in CSP 2.5 Preview1
You need CSP latest Version

Thank you @F40LM for releasing such great car, which might have been tested in 2.5, but works flawlessly in 2.4 preview211.(looking at you URD!)
Thank you so much for the impeccable driver animation:
2) Interior Animations
-. GAS, Brake, Clutch Pedal with Feet : Don't need Key assign
-. Trun Signal Switch with Arm & Hand : need Key Assign
-. Lighting Signal Switch with Arm & Hand : need Key Assign
-. Windows Open with Arm & Hand
-. Fog Light with Arm & hand
-. H-Pattern Shifter with Arm & Hand
-. Horn With Arm & Hand
The second this week, not sure if it is a new trend, I hope it is, but as a VR driver, it is very much appreciated and makes AC feel so 2025.

 

[andrevr]

GT1 class does not have abs or tcs. I think ChemFlummi did not include them for this reason

I'll take into account what was said about the mesh adjustment, at least this way I won't have to redo the windshield wipers from scratch again LOL


Now a little question: since I switched to pure LCS and the new CSP I have all these graphic artifacts (lights and reflections with every PP-Filter I have). Does anyone know what causes them?



View attachment 1391018

Not a fizix expert, but I don't believe the electronic.ini should ever be left blank, no matter how opinionated the modder/driver is about <clarkson-anorak-voice>XYZ CAR DID NOT HAVE ABS!!</clarkson-anorak-voice>.

There are driving modes which activate ABS by default. If the electronics.ini is deliberately left blank, at game time the AC engine could be left in an indeterminate state, because the entries required to process ABS simply aren't there. Symptoms are typically a 0.5s period oscillation of the steering (particularly on older non-DD wheels) and a non-responsive brake pedal. This can be fixed at the setup screen by manually turning ABS off (every.time.you.drive.the.car) Ask me how I know

If the electronics is populated, the values will be used, and PRESENT and ACTIVE parameters will be respected. If these are both set to zero (=0) the ABS will automagically be turned off correctly, no matter what the driving mode is set to. Ditto for TRACTION CONTROL/EDL.

I have yet to experiment with culling the other parameters in the file if PRESENT and ACTIVE set to 0, to see if anything catches fire. Soon

CC: @Alis_70 @Fanapryde @FrustratedUse

 

[ClimaxF1]

this is all good and well , but the brakelights are no longer distinguishable when lights are on (without having to resort to turning PP Effects on), so it's no fav+ in my book...

Not sure what is causing the problem on your side but definetely don't have this problem

Are you not supposed to have PP effects on, could be wrong but not sure why you have it off

 

[GT3Masters97]

Not a fizix expert, but I don't believe the electronic.ini should ever be left blank, no matter how opinionated the modder/driver is about <clarkson-anorak-voice>XYZ CAR DID NOT HAVE ABS!!</clarkson-anorak-voice>.

There are driving modes which activate ABS by default. If the electronics.ini is deliberately left blank, at game time the AC engine could be left in an indeterminate state, because the entries required to process ABS simply aren't there. Symptoms are typically a 0.5s period oscillation of the steering (particularly on older non-DD wheels) and a non-responsive brake pedal. This can be fixed at the setup screen by manually turning ABS off (every.time.you.drive.the.car) Ask me how I know

If the electronics is populated, the values will be used, and PRESENT and ACTIVE parameters will be respected. If these are both set to zero (=0) the ABS will automagically be turned off correctly, no matter what the driving mode is set to. Ditto for TRACTION CONTROL/EDL.

I have yet to experiment with culling the other parameters in the file if PRESENT and ACTIVE set to 0, to see if anything catches fire. Soon

CC: @Alis_70 @Fanapryde @FrustratedUse

I mentioned chem simply because he took care of the physics. But all these little fixes will be added in a mini update soon

 

[MasterFocus]

Been having this "problem" for a while now, might not be the only one...
SkidmarkFX, before the skidmarks would stay for days, giving character to tracks. Now they disapear every time I restart my PC??
Not a game breaker tho, but would be nice to get it back like it was before...

 

[GT3Masters97]

Ford GT Matech GT1 Update

94.77 MB file on MEGA

mega.nz

Thanks @Masscot, @Alis_70, @andrevr and all the others for the help, I hope everything works now. 😂

 

[JK1977]

Released : Ferrari 365 GTB4 Competizione

Author:F302
3D Model :The Crew2
Texture Update : F302 (rework)
Skins: F302,Mr.Hunt
3d work: F302
Lod´s: ACTK
Tweaks:ACTK
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
tested on CSP 0.2.5-preview1
PP filer PURELIFE_EVO
have fun!
Knowing Bugs: driver shift animation
To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager

66.18 MB file on MEGA

mega.nz

 

[Cote Dazur]

Knowing Bugs: driver shift animation

As we have seen in 2 mods this week, close to perfect animation is available and possible and gives AC a much deserved modern feeling.
I hope some of our beloved mod enhancers will dedicate some time and energy to update such crucial aspect of our favourite car mods.

 

[jac0]

Not sure what is causing the problem on your side but definetely don't have this problem

Are you not supposed to have PP effects on, could be wrong but not sure why you have it off

View attachment 1391033View attachment 1391034

I preffer PP off , for VR performance reasons (I'm running Oculus pixels per display 1.8 , high resolution, and then PP introduces application framedrops)

There are examples of cars that have visible brakelights without having to use PP (Glare), so it is doable!

For example the Dodge Viper (SR I) RT/10 - 1992 by Alberto Daniel Russo; Real Specs (rs_viper_rt10_92) , for which I created/updated some chameleon skins today :

DOWNLOAD

 

[Ararelyracer]

They dont seem blurred on the Image. This how used discs will look 👍🏻

Maybe I should have provided a snap shot of the texture file, it was supposed to be a drilled disc and I do not see the holes at all. So somehow it seems to me that when the car is stationary, it is is still showing the blurred texture.

 

[DavidDGA]

2005 FFSA GT Championship - GT1 / GT2 skinpack for RSS GT / GTN and Legion Corvette C5R

Another big skinpack done, 27 this time. It has a lot of 996 GT3 Cup too which will made in a future (I hope). At the moment all GT1 and GT2 are released. Time to search another grid to make

Enjoy, hope you like it

2005 FFSA GT Championhip - GT1 / GT2 skinpack

Here is the 2005 FFSA GT skinpack for RSS GT / GTN packs and Legion Corvette C5R. Another championship completed, so many Vipers but it has great variety of liveries. In this skinpack you'll get all GT1 and GT2 class. It has also so many Porsche...

www.overtake.gg

 

[Papifix]

I have the problem that the wheels of some openwheelers are not displayed in the race. Openwheelers and single-seaters are activated in the content. Newest CSP.

Is there a way to fix this?

 

[FeGabriel]

I have the problem that the wheels of some openwheelers are not displayed in the race. Openwheelers and single-seaters are activated in the content. Newest CSP.

Is there a way to fix this?

Do you mean the texture of the tyre ?

always use the tag open wheeler on these cars

 

[Vintagedriver]

Do you mean the texture of the tyre ?

always use the tag open wheeler on these cars

Interesting, so these tags like “open wheeler” “F1”, “1923” “RWD” or whatever are also for certain aspects of the car. Just delete a whole bunch and changed it to tags that are for me more usefully.

BTW think @Papifix is talking about the flash view of some floating cars without 4 wheels in the distance. I have the same, was thinking it has to do with bad made LOD’s as not all the cars have that hovering appearance at the distance. Luckily the members here can explain that correctly and even give tips to correct.

 

[Tetri]

While i was testing the TZ2 an hour ago, this came out :



Gadu Boyz Lancia Fulvia

 

[kakauiyt]

F1 2013 1.0 Update dropped​

Changelog :
Fixed Suspension being wrong in redbull mercedes williams

Fixed leds animation, either they were only 3 leds active, or leds were full at only 60% of gear speed.

Fixed drs led shaders, and made them actually work

Fixed some helmets

Added engine sounds, for redbull and marussia (prophetimus), ferrari (ac_racer00), mercedes and lotus (FrixonPilot)

Added Massa helmet skins, forgot about them, India Alonso and Brazil Massa helmet skin included (Nickray)

Fixed Mclaren chrome looking weird, and hands not being placed correctly

Fixed tororosso lodB having wrong texture

Fixed Ferrari cockpit flickering

Added Wet tyre support

Fixed Lotus not being playable because it crashed for "driver file missing" that was just a minor corruption in the folder, copied pasted all files into a new folder and renamed it back to lotus and it worked somehow

 

[BruceD]

Hi !!
Lately on some circuits or cars I get an error "Failed to allocate gpu memory".
I use the latest CSP version and "Pure".
Thank you for the help..

Not sure if someone has answered you yet but it's the csp version, some tracks (and cars apparently) are not compatible with it for whatever reason and you'll need to downgrade to a lower version.